DOWNLOAD THE COMPLETE PROJECT

2624 Users found this project useful

ABSTRACT

In this project, three alternative design solutions were considered for the foldable camp bed. The writer utilized the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discussed and the solutions of the alternatives that best satisfied the limitations were selected for production. The material selected for design and cost analysis, production processes and operation maintenance and problems encountered during the design were also included.

CHAPTER ONE

INTRODUCTION

Camp bed is used universally for relaxation, emergency eases such as war and in other several ways, it is the acknowledgement of these resources that led to the design of the foldable camp – bed. All the existing foldable camp bed, have almost the same dimension but differ in design. Some use rope and ailets while the modern design make use of wood and spring. Some other are constructed using straight bars, pipes of angle iron.

1.1   LIMITATION OF ALREADY EXISTING FOLDABLE CAMP BED

Some foldable camp beds are made of Iron bars which are too heavy and cannot be carried with ease. Most existing foldable camp – bed are cumbersome to carry because their lengths which are normally six feet or 183 meters or 1830mm. Some of the materials used for fabrication of the foldable camp bed may not be locally got and this affects its prince, making its availability to become more rare. In the market, design that make use of springs to hold the improvised materials or even wood are found. But when the spring fill off, its efficiency is reduced and this make it more profitable to make use of wood than spring to hold improvised mattress.

1.2    DESIGN SPECIFICATION OF THE FOLDABLE CAMP BED

It is high in weight It can be produced locally It is portable It has an in built head rest which is adjustable. The tarpaulin material used in folding the foam to the wood can be easily removed along with the wood for cleaning. It is could carry a person up to 75kg in weight. Pipes (square) used are made of galvanized steel and also the angle Iron used is made if galvanized steel both painted with aluminum oil paint to avoid corrosion. It is easy to manipulate. All these specification put together make this project a viable one that can compete favorably with any existing foldable camp bed and also eliminate the limitations posses by earlier designers.

  DOWNLOAD THE COMPLETE PROJECT