DOWNLOAD THE COMPLETE PROJECT

3361 Users found this project useful

RADIO FREQUENCY BASED WIRELESS BATCH COUNTING DEVICE FOR BREWERY

CHAPTER ONE

INTRODUCTION

1.1.   Background to the Study

Owing to the high rate of industrial espionage and theft, industrial security techniques need to be improved to arrest/combat pilfering in industries.  This project work tries to bring in an improved security measure which can be used to check pilfering in Brewery industries.  Pilfering of bottled drinks is a common theft in Breweries.  And this act is perpetrated in the conveyor before a standalone counting device takes account of it. This has a tremendous effect on the stature of the fire – if it is not properly checked, could lead to liquidation and bankrupts of the firm. Conventionally, there is a batch counting device that counts the bottled drinks and displays the values numerically at same spot carrier criminals who pilfer the products divert it before the counter.  This chronology in social vices in the brewery industry has motivated me to embark on a project that is capable of counting/the bottled drinks in the capable of counting/the bottled drinks in the conveyor and display the value numerical and wirelessly (using Rf transmission waveband) to its receiver installed about 100m away. This device will count the product before it gets to the standalone version.  This technique will help to check pilfering and bring industrial espionage to halt.

1.2 Statement of the Problem

Brewery industries all over world face the problem of pilfering of the products by the workers most frequently in the conveyer. This menace gave way to the development of a stand alone batch counting device which is usually installed in the conveyors to record the total number of bottled products. This techniques is facing serious threat since the bad-eggs pilfer/divert the products before it gets to the counter. Owing to the challenges mentioned above, there is need to develop a system which will be installed at the entry point of the conveyors to count the products without the consent of the workers and display the value to a receivers unit  installed in the manager office using Radio-frequency technology.

1.3.   Aims and Objectives

The aim of this project is to design and implement a Radio frequency based wireless batch counter capable of counting bottled drinks/products and display it at a remote location.

1. To develop system which can communicate using Radio frequency technology.

2. To develop an opto coupler module which can detect opaque objects like bottle using laser diode and visible light

3. To develop a 2-digit decimal counting unit which can count from 00-99.

4. To develop a system which is pure hardwired. No micro-program.

5. To develop a  power supply unit that can power Rf device.

1.4.   Significance of the Study

This project work signifies a lot in telecom, computer and electronic engineering it is very useful in a number of domestic places like in bedroom and security lamps in the compound.  A project of this type if modified can be used as a gate/door opening system, car immobilizer and for industrial process control.  Another vital significance of this system is in the control of Air conditioner and refrigerators and other lamps in modern buildings.  This system can be used to start and stop a power generating set from a distance.

1.5.   Scope of the Study

This project work covers the following; Tuned Radio-frequency transmitter and receiver modules, Ne555 timer, Decimal counting unit, Decoders and transistors and electromagnetic relay.  It also lays great emphasis on passive and active components used to implement the system.  It also x-rays the mode of calculations of the basic parameters used in the design and other areas of application of the device.  This report elaborates on the block diagram and principle of operation of the system.

1.6.   Limitations of the Study

1. This project work is focused on the design and implementation of Rf batch counter for brewery.

2. It is a prototype of the real-life system due to the ratings of the components used to implement it.

3. It can only count products in an opaque bottle? (Filled or partially filled)

4. It uses only Radio frequency to communicate with the receiver

5. The system is powered using power from MAINS.

6. The receiver displays a maximum of 100 counts (00-99) and does not contain a memory device for storage of data.

1.7.  Project Report Organization

This project report is presented in six chapters to appropriately illustrate the steps involved in its implementation.  Chapter one introduce the design overview, objectives and significance of the project.  Chapter two is basically the literature review and some theories relevant to the design.  Chapter three is on the system design analysis while chapter four elaborates on the implementation, testing and result.  Finally chapter five summarizes the entire thesis and recommendations.