ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2

Format: MS WORD | Chapter: 1-5 | Pages: 96 | 2913 Users found this project useful | Price NGN5,000

ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2

ABSTRACT

This research work focuses on the development of Iso-safety design charts for flexural design of flat slabs at predefined reliability levels in accordance with Eurocode 2 (2004) design criteria. Constitutive models for reinforcing steel and concrete were selected in accordance with the Eurocode 2 design requirements and subsequently the flexural limit state function was derived. Charts were developed for the flexural design of rectangular reinforced concrete sections with respect to the position of neutral axis ( ) for each concrete grade (fck) and steel grade (fyk). Uncertainties in loading and geometrical properties were obtained and a program was developed taken into consideration EC2 design requirements, a safety index β value of 1.81 was achieved for various points on each of the generated curve using First Order Reliability Method (FORM). Reliability-based design charts called Iso-safety charts were produced to target safety indices; βT of 3.3, 3.8 and 4.3 as the minimum recommended for the three failure consequence classes by Eurocode 0 (2002). This recommendation shows that Eurocode 2 design of flat slabs considering flexural failure with safety index value of 1.81 provides designs that are below the recommended target safety indices. A flat slab was there after designed using the charts and was shown that for the same loading and geometrical considerations, the area of flexural reinforcement required increased by 40%, 55% and 75% over Eurocode 2 design for corresponding target safety indices of 3.3, 3.8 and 4.3 respectively. Sensitivity analysis of these provided reinforcements was carried out on other flat slab failure modes and was observed that at low reinforcement ratios punching shear safety is dependent majorly on the effective depths rather than the flexural reinforcement.

CHAPTER ONE

INTRODUCTION

1.1 BACKGROUND OF THE STUDY

Flat-slab system of construction is one in which the beams used in the conventional methods of constructions are done away with. The slab directly rests on the columns and load from the slab is directly transferred to the columns and then to the foundation (Anitha et al., 2007).

The Common practice of design and construction is to support the slabs by beams and support the beams by columns. This may be called beam-slab construction. The beams reduce the available net clear ceiling height. Hence in warehouses, offices and public halls sometimes beams are avoided and slabs are directly supported by columns. This type of construction is also aesthetically appealing. The slabs which are directly supported by columns are called flat slabs.

For many years, it has been assumed in the design of structural systems that all loads and strengths are deterministic. The strength of an element is determined in such a way that it exceeded the load with a certain margin. The ratio between the strength and the load was denoted as the safety factor which is considered as a measure of the reliability of the structure. In codes of practice for structural systems, values for loads, strengths as well as safety factors are prescribed (Sorensen, 2004).

The safety factors are traditionally determined on the basis of experience and engineering judgment. However, in recent codes such as Eurocode 2 partial safety factors are used. Characteristic values of the uncertain loads and resistance are specified and partial safety.

Tags: ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2 ISO-SAFETY DESIGN OF FLAT SLABS

DOWNLOAD THE COMPLETE PROJECT

Project information

Project Price

NGN5,000
Number of Pages

96
Number of Chapters

1-5
Additional Content

Abstract, Table of Content & Questionnaire

ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2

Not The Topic You Are Looking For?

For Quick Help Chat with Us Now!

+234 813 292 6373

+233 55 397 8005

Search for your project topic

HOW TO GET THE COMPLETE PROJECT ON ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2 INSTANTLY

Click on the Download Button above.
Select any option to get the complete project immediately.
Chat with Our Instant Help Desk on +234 813 292 6373 for further assistance.
All projects on our website are well researched by professionals with high level of professionalism.

Here's what our amazing customers are saying

Temitayo Ayodele

Obafemi Awolowo University

My friend told me about iprojectmaster website, I doubted her until I saw her download her full project instantly, I tried mine too and got it instantly, right now, am telling everyone in my school about iprojectmaster.com, no one has to suffer any more writing their project. Thank you for making life easy for me and my fellow students... Keep up the good work

Very Good

Adam Alhassan Yakubu

UDS

Excellent work and delivery , I promise to share my testimonies everyone in need of this kind of work. You're the best

Excellent

Abraham Ogbanje

NATIONAL OPEN UNIVERSITY OF NIGERIA

At first I was afraid.. But I discovered they are legit. I will bring more patronize

Very Good

Abubakar Iliyasu Hashim

Federal college of education pankshin affiliated to university of jos

I am highly impressed with your unquantifiable efforts for the leaners, more grace to your elbow.I will inform my colleagues about your website.

Very Good

Dau Mohammed Kabiru

Kaduna State College of Education Gidan Waya

This is my first time..Your service is superb. But because I was pressed for time, I became jittery when I did not receive feedbackd. I will do more business with you and I will recommend you to my friends. Thank you.

Very Good

MATTHEW NGBEDE

Ahmadu Bello University

I wish I knew you guys when I wrote my first degree project, it took so much time and effort then. Now, with just a click of a button, I got my complete project in less than 15 minutes. You guys are too amazing!

Excellent

Merry From BSU

I am now a graduate because of iprojectmaster.com, God Bless you guys for me.

Excellent

Stancy M

Abia State University, Uturu

I did not see my project topic on your website so I decided to call your customer care number, the attention I got was epic! I got help from the beginning to the end of my project in just 3 days, they even taught me how to defend my project and I got a 'B' at the end. Thank you so much iprojectmaster, infact, I owe my graduating well today to you guys...

Excellent

Emmanuel Essential

Kogi state University

I actually took the risk,you know first time stuff But i was suprised i received as requested. I love you guys 🌟 🌟 🌟 🌟

Very Good

Samuel From Ajayi Crowther University

You guys just made life easier for students. Thanks alot iprojectmaster.com

Excellent

View All Reviews

FREQUENTLY ASKED QUESTIONS

How do I get this complete project on ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2? Simply click on the Download button above and follow the procedure stated.
I have a fresh topic that is not on your website. How do I go about it?
How fast can I get this complete project on ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2? Within 15 minutes if you want this exact project topic without adjustment
Is it a complete research project or just materials? It is a Complete Research Project i.e Chapters 1-5, Abstract, Table of Contents, Full References, Questionnaires / Secondary Data
What if I want to change the case study for ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2, What do i do? Chat with Our Instant Help Desk Now: +234 813 292 6373 and you will be responded to immediately
How will I get my complete project? Your Complete Project Material will be sent to your Email Address in Ms Word document format
Can I get my Complete Project through WhatsApp? Yes! We can send your Complete Research Project to your WhatsApp Number
What if my Project Supervisor made some changes to a topic i picked from your website? Call Our Instant Help Desk Now: +234 813 292 6373 and you will be responded to immediately
Do you assist students with Assignment and Project Proposal? Yes! Call Our Instant Help Desk Now: +234 813 292 6373 and you will be responded to immediately
What if i do not have any project topic idea at all? Smiles! We've Got You Covered. Chat with us on WhatsApp Now to Get Instant Help: +234 813 292 6373
How can i trust this site? We are well aware of fraudulent activities that have been happening on the internet. It is regrettable, but hopefully declining. However, we wish to reinstate to our esteemed clients that we are genuine and duly registered with the Corporate Affairs Commission as "PRIMEDGE TECHNOLOGY". This site runs on Secure Sockets Layer (SSL), therefore all transactions on this site are HIGHLY secure and safe!